Why our lines are more than just a piece of technology
Our heated lines are not a run-of-the-mill accessory. They are well thought out down to the last detail – for safe, efficient and low-maintenance applications in gas analysis.
Developed and produced in Germany.
* TPU = thermoplastic polyurethane, PE = polyethylene, PVC = polyvinyl chloride
How PSG lines make your work better and easier
Less worry, more control. Whether extractive emission measurement technology (CEMS) or demanding industrial processes: With our lines, the sample gas remains at exactly the right temperature – even under extreme conditions. No condensation. No CO baseline. No discussions in the audit.
Process clarity
Stable sample transport = reliable measurement results
Cost efficiency
Up to 25% less energy consumption over the life cycle
Regulatory compliance
Meets what standards require – and what auditors expect
Technical advantages in comparison
Thanks to the combination of extruded construction and intelligent heating technology, PSG lines often pay for themselves in the first year of operation.
| Merkmal | Klassische PA12-Leitung | PSG-Extrudierte Leitung |
|---|---|---|
| Energieverbrauch | 90 W/m | 60 W/m |
| Heizkreislänge | bis 60 m | bis 100 m |
| Kürzbarkeit | nein | vor Ort anpassbar |
| CO-Baseline | vernachlässigbar | vernachlässigbar |
| ATEX-Zone | eingeschränkt | Zertifikate für gesamten Aufbau (patentierte Ex²/Ex³-Technologie) |
* Polyamide 12 corrugated cable
Frequently asked questions (FAQ)
Our top products
Heated Wall Bushings for 180°C Holding Temperature in various lengths
PID Temperature Controller for PSG Gas Sampling Probes and Heated Lines (tabletop device)
PID Temperature Controller for PSG Gas Sampling Probes and Heated Lines (tabletop device)
Controlled Sample Line up to 200°C holding temperature, pre-fabricated (no cut-to-length) wiith PTFE / PFA tubes, coextruded jacket extreme flexible
Controlled All-in-One Sample Line with 200°C holding temperature and configurations for the complete operation of the probe and preheated back purge air
Self regulating Sample Line up to 120°C holding temperature, cut-to-length with PTFE / PFA or stainless steel tubes, fully certified for ATEX Zone 1: II 2G Ex IIC
Self regulating Sample Line up to 120°C holding temperature, cut-to-length with PTFE / PFA or stainless steel tubes, fully certified for ATEX Zone 1: II 2G Ex IIB
Controlled Sample Line up to 180°C holding temperature, cut-to-length with PTFE / PFA or stainless steel tubes, heating cable certified for ATEX Zone 1: II 2G Ex IIC und IEcEX
Controlled Sample Line up to 180°C holding temperature, cut-to-length with PTFE / PFA or stainless steel tubes, heating cable certified for ATEX Zone 1: II 2G Ex IIC und IEcEX
Controlled Sample Line up to 150°C holding temperature, cut-to-length with PTFE / PFA or stainless steel tubes, heating cable certified for ATEX Zone 1: II 2G Ex IIC und IEcEX
Self regulating Sample Line up to 120°C holding temperature, cut-to-length with PTFE / PFA or stainless steel tubes and small bending radius
Controlled Sample Line for up to 200°C holding temperature, cut-to-length with PTFE /PFA tubes, max. length 300m (heating circuit 73 m) and small bending radius
Controlled Sample Line up to 200°C holding temperature, pre-fabricated (no cut-to-length) with PTFE / PFA tubes, coextruded with extreme robust Ringwell Jacket
Controlled Sample Line up to 200°C holding temperature, pre-fabricated (no cut-to-length) with PTFE / PFA tubes for CEMS, flexible PA 12 Jacket
Self regulating Sample Line up to 120°C holding temperature, cut-to-length with PTFE / PFA or stainless steel tubes
Controlled Sample Line for up to 200°C holding temperature, cut-to-length for CEMS, max. length 300m (heating circuit 73 m) and up to PTFE /PFA inner tubes (exchangable as option)
Controlled Sample Line for up to 200°C holding temperature, cut-to-length for CEMS, max. length 300m (heating circuit 60 m) and up to 2 PTFE inner tubes
Regulated line for up to 200°C holding temperature, with 2 heated ends, can be shortened, max. 300 m (heating circuit length 73m), 2 x PTFE inner core.
Enquire now and get advice
Do you have a specific application or need a technical assessment first? Our team is ready to help.
Made with confidence in Germany | ATEX-certified | Over 50 years of experience in gas analysis